Back in stock & better than ever! Machined arms now include dual m3 setscrews for mounting!
Looking for a more scale look for your custom monster? Our machined aluminum sway bar arm kits replicate many of the 1:1 monster trucks! This kit includes a unique square spring steel sway bar and 2 machined aluminum sway bar arms with dual m3 knurled point setscrews for mounting each arm to the bar. The new square bar has a slightly softer twist rate than the original round bar did, which will allow a little more flex in your sway bars. The included machined arms are just under 2" long, and would be direct replacements for our Barbarian and the Axial SMT10 sway bar systems. Your existing sway bar end links can be bolted to these using either #4-40 or M3 mounting hardware, or you can select to purchase them as options during checkout. If retrofitting the front and rear of your chassis with this kit, you will need to purchase 2 of these kits.
Installation notes: Due to the various width chassis available, the sway bar will need to be cut down to fit your chassis. Blue loctite is recommended for each of the locking m3 setscrews.
Notes on adding sway bar end links:
- If you are replacing the stock SMT10 sway bars (or adding one to the front in the stock location), choose the 'stock SMT10 length" option.
- If you want sway bar end link arms matching what's shown in the SMT10 chassis photo that's using 100mm shocks, those are the "extended length" option.
- If you want sway bar end link arms matching what's shown in the SMT10 chassis photo but you're using the stock SMT10 shocks, those are the "extended XL length" option.
CPE-SWAYCNC: Machined Sway Bar Kit
- Manufacturer: CPE
- Man. P/N: SWAYCNC
- Stock Status: In Stock!